Chassis : One Rack Unit (1RU) chassis
CPU : One or two AMD Milan or Rome processors
Memory : 32 slots for Registered DIMMs (RDIMMs) or Load-Reduced DIMMs (LRDIMMs)
Expansion slots :
Three half-height riser slots
Riser 1 (controlled by CPU 1):
One x16 PCIe Gen 4.0 slot (Cisco VIC), half-height, 3/4 length
Riser 2 (controlled by CPU 1):
One x8 PCIe Gen 4.0 slot, half-height, 3/4 length
Riser 3 (controlled by CPU 1):
One x16 PCIe Gen 4.0 slot (Cisco VIC), half-height, 3/4 length
OR
Two full-height riser slots
Riser 1 (controlled by CPU 1):
One x16 PCIe Gen 4.0 slot (Cisco VIC), full-height, 3/4 length
Riser 2 (controlled by CPU 1): ◦
One x16 PCIe Gen 4.0 slot (Cisco VIC), full-height, 3/4 length
Storage controllers : One Cisco M6 12G SAS RAID controller or up to two Cisco 12G SAS HBAs plug into a dedicated slot.
Cisco M6 12G SAS RAID Controller with 4GB FBWC:
RAID support (RAID 0, 1, 5, 6, 10, 50, 60, SRAID0, and JBOD mode)
Supports up to 24 internal SAS/SATA drives
Plugs into a dedicated slot
Cisco 12G SAS HBA :
No RAID support
JBOD/Pass-through Mode support
Supports up to 16 SAS/SATA internal drives
Plugs into a dedicated slot
Interfaces :
Rear panel:
One 1Gbase-T RJ-45 management port
One RS-232 serial port (RJ45 connector)
One DB15 VGA connector
Two USB 3.0 port connectors
One flexible modular LAN on motherboard (mLOM)/OCP 3.0 slot that can accommodate various interface cards
Front panel:
One KVM console connector (supplies two USB 2.0 connectors, one VGA DB15 video connector, and one serial port (RS232) RJ45 connector)
Power subsystem : Up to two of the following hot-swappable power supplies
1050 W (AC)
1050 W (DC)
1600 W (AC)
2300 W (AC)
Fans : Eight hot-swappable fans for front-to-rear cooling